|
SPECIFICATIONS
FOR: NSPT252, NSPT554 & NSPT856
Exterior finish
Exterior front, sides and
solid door(s) are white colored steel. The exterior top and bottom are
galvanized steel. All exterior joints and seams fold in without lap joints.
No exposed raw edges. • Interior finish: Interior
liner and interior door panel are white.
Insulation
The complete cabinet and
solid door(s) are foamed-in-place with high density polyurethane insulation.
Hardware
Heavy duty,
pivot hinges; centered key locks; full
length, stainless steel pull handles, self
adjusting magnetic gaskets; 4” dia. casters (four casters on 1 and 2 door
models with 2 locking) and six 6” legs standard on 3 door model. Three
epoxy coated shelves per door - standard.
Doors
Full size double
pane glass doors with anti-condensate heater
wires are standard on the front of
the refrigerator and solid foam lined doors are standard on the back.
Electrical
All models are standard
with complete perimeter, anti-condensate door opening heater wires and
an interior fluorescent light activated by a switch in the upper panel.
Instrumentation
Digital LED thermometer
reading degrees C.
Refrigeration
Complete top mounted refrigeration
system. A copper tube, aluminum fin evaporator coated with a special acrylic
to prevent deterioration from acidic materials.
The condensate is collected and automatically
evaporated from a hot gas evaporator
pan increasing the efficiency of the
system. Refrigerant flow is controlled by a thermostatic
expansion valve increasing the ability of the refrigerator to meet varying
load conditions. Adjustable control range from 2°C to 10°C. Factory
preset to 4°C. |
